Weslo Cadence G 3.9 Treadmill User Manual - Page 7
Assembly
View all Weslo Cadence G 3.9 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • To identify small parts, see page 6. • Assembly requires the following tools: the included hex keys one adjustable wrench To avoid damaging parts, do not use power tools. 1. See the inset drawing. Pull out the indicated pin (A) and raise the uprights (B) as shown. 1 A B 2. Insert a rear stabilizer bar (C) into the left upright (B). Attach the rear stabilizer bar with two M6 x 45mm bolts (D), two M6 washers (E), and two M6 nuts (F). Attach the other rear stabilizer bar (not shown) to the right upright (B) in the same way. Tighten the knob (G) in the indicated location. B A 2 G E B F C D 7