Home » Weslo Manuals » Exercise and Fitness » Weslo Gym 750 » Manual Viewer

Weslo Gym 750 Uk Manual

Weslo Gym 750 Manual

Get Weslo Gym 750 PDF manuals and user guides

View all Weslo Gym 750 manuals

Add to My Manuals
Save this manual to your list of manuals

Weslo Gym 750 manual content summary:

Weslo Gym 750 | Uk Manual - Page 1
& Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK email: [email protected] CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Visit our website at www.iconeurope.com
Weslo Gym 750 | Uk Manual - Page 2
CHART 16 CABLE DIAGRAM 17 TROUBLESHOOTING AND MAINTENANCE 18 ORDERING REPLACEMENT are attached in the centre of this manual. Remove the PART IDENTIFICATION CHART and the the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in
Weslo Gym 750 | Uk Manual - Page 3
the weight system only as described in this manual. 6. Inspect and properly tighten all parts adjacent walls. Wall 10. The weight system is designed to support a maximum user weight of 135 kg (300 lbs). 11. with pre-existing health problems. Read all instructions before using. ICON assumes
Weslo Gym 750 | Uk Manual - Page 4
YOU BEGIN Thank you for selecting the versatile WESLO® GYM 750 weight system. The weight system offers a selection be found on a decal attached to the weight system (see the front cover of this manual for the location of the decal). Before reading further, please review the drawing below and
Weslo Gym 750 | Uk Manual - Page 5
Make Things Easier for Yourself Everything in this manual is designed to ensure that the weight system the packing materials until assembly is completed. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight system, make sure all parts are oriented
Weslo Gym 750 | Uk Manual - Page 6
) into the same holes. Make sure that the indicated holes are closer to the bottom of the Weight Guides. Secure the Weight Guides in place with two M10 x 70mm Bolts (57), two M10 Washers (70), two 10mm x 12.5mm Spacers (37), and two M10 Nylon Locknuts (68). Tighten
Weslo Gym 750 | Uk Manual - Page 7
Weight Tube (12) into the Weights (15). Lubricate the indicated holes in the Top Weight (14) with grease. Slide the Top Weight onto the Weight Guides (10). 10 Lubricate 14 3 12 15 5. Attach the Top Frame (4) to the Upright (3) with 5 two M8 x 68mm Bolts (63) and two M8 Nylon Locknuts (69
Weslo Gym 750 | Uk Manual - Page 8
ARM ASSEMBLY 7 7. Apply grease to an M10 x 70mm Bolt (57). Attach the Leg Lever (9) to the Seat Frame (8) with the Bolt and an M10 Nylon Locknut (68). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. Grease 8 57 9 68 8. Apply grease to an M10 x 125mm Bolt (64).
Weslo Gym 750 | Uk Manual - Page 9
10. Insert the post on the Left Arm (7) through the hole in the Press Frame (5). Make sure the Arm is behind the indicated bracket on the Press Frame. Slide a 25mm Washer (29) over the post on the Left Arm (7). Attach an M6 x 43mm Bolt (61) to the post with an M6 Nylon Locknut (72). Make sure the
Weslo Gym 750 | Uk Manual - Page 10
14. Wrap the High Cable (50) over a 90mm Pulley 14 (34). Attach the Pulley and two Finger Guards (35) to the Top Frame (4) with an M10 x 46mm Bolt (53) and an M10 Nylon Locknut (68). 15. Attach the end of the High Cable (50) to the 15 Small "U"-bracket (11) with an M8 Washer (71) and an M8
Weslo Gym 750 | Uk Manual - Page 11
18. Wrap the Press Cable (49) under a 90mm Pulley 18 (34). Attach the Pulley and two Finger Guards (35) to the Double "U"-bracket (42) with an M10 x 46mm Bolt (53) and an M10 Nylon Locknut (68). 19. Apply grease to an M10 x 78mm Bolt (54). Attach 19 the Pulley Arm (38) to the Upright (3) with
Weslo Gym 750 | Uk Manual - Page 12
22. Wrap the Short Cable (47) over a 90mm Pulley (34). Attach the Pulley and two Finger Guards 22 (35) to the Double "U"-bracket (42) with an M10 x 46mm Bolt (53) and an M10 Nylon Locknut (68). 53 35 35 42 68 47 34 23. Attach the end of the Short Cable (47) to the "U"bracket (43) with an M8
Weslo Gym 750 | Uk Manual - Page 13
26. Wrap the Low Cable (48) under a 90mm Pulley 26 (34). Attach the Pulley and two Finger Guards (35) to the bracket on the Base (1) with an M10 x 46mm Bolt (53) and an M10 Nylon Locknut (68). 27. Route the Low Cable (48) over a 90mm Pulley 27 (34). Attach the Pulley, a Cable Trap (36), and
Weslo Gym 750 | Uk Manual - Page 14
If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly routed, they may be damaged this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables; see TROUBLESHOOTING AND
Weslo Gym 750 | Uk Manual - Page 15
ADJUSTMENTS This section explains how to adjust the weight system. Refer to the accompanying exercise guide to see the correct form for each exercise. Make sure all parts are properly tightened each time the weight system is used. Replace any worn
Weslo Gym 750 | Uk Manual - Page 16
: The actual resistance at each station may vary due to differences in individual weight plates as well as friction between the cables, pulleys, and weight guides. WEIGHT Top 1 2 3 4 5 6 7 8 HIGH PULLEY (lbs.) 18 32 46 59 75 92 109 121 132 PRESS ARM (lbs.) 26 41 56 73 87 106 120 130
Weslo Gym 750 | Uk Manual - Page 17
CABLE DIAGRAMS The cable diagrams below show the proper routing of the Short Cable (47), the Low Cable (48), the Press Cable (49), and the High Cable (50). Use the diagrams to make sure that the cables have been assembled correctly. If the cables have not been correctly routed, the weight system
Weslo Gym 750 | Uk Manual - Page 18
TROUBLESHOOTING AND MAINTENANCE TIGHTENING THE CABLES Woven cable, the type of cable used on the weight system, can stretch slightly when it is first used. If
Weslo Gym 750 | Uk Manual - Page 19
NOTES 19
Weslo Gym 750 | Uk Manual - Page 20
when ordering replacement parts: • the MODEL NUMBER of the product (WLEVSY1825.0) • the NAME of the product (WESLO GYM 750 weight system) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING
Weslo Gym 750 | Uk Manual - Page 21
Bumper 76 1 M4 x 19mm Self-tapping Screw 77 1 M4 Washer 78 2 Butterfly Grip 79 1 Lock 80 1 Lock Pin # 1 User's Manual # 1 Exercise Guide # 1 Grease Packet Note: "#" indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of
Weslo Gym 750 | Uk Manual - Page 22
PART IDENTIFICATION CHART-Model No. WLEVSY1825.0 M4 x 19mm Selftapping Screw (76) M6 x 16mm Screw (40) M6 x 63mm Screw (67) M6 x 58mm Screw (65) M4 Washer (77) M10 x 52mm Bolt (52) M6 Washer (73) M10 x 46mm Bolt (53) M8 Washer (71) M8 x 45mm Bolt (60) M6 x 43mm Bolt (61) M10 Washer (70) M6
Weslo Gym 750 | Uk Manual - Page 23
EXPLODED DRAWING A-Model No. WLEVSY1825.0 R1005B 64 70 25 27 29 26 49 5 28 61 6 72 70 68 27 30 29 26 28 72 55 37 70 50 52 34 53 34 36 26 68 4 68 68 37 70 35 34 35 73 24 61 65 73 20 24 74 23 73 65 78 73 49 7 20 24 74 35 52 36 34 35 44 36 34 44 35 35 68 78 22 21
Weslo Gym 750 | Uk Manual - Page 24
EXPLODED DRAWING B-Model No. WLEVSY1825.0 R1005B 52 54 63 32 31 33 62 70 70 68 38 35 34 35 68 39 68 36 66 71 70 25 71 69 18 69 54 35 38 68 70 36 52 68 34 67 73 73 67 35 34 35 46 35 36 35 34 70 69 3 69 70 68 53 68 42 68 53 35 34 35 10 32 79 50 60 80 71 69 11 69 12 14 15 16