Weslo Gym 750 Uk Manual - Page 10

14. Wrap the High Cable (50) over a 90mm Pulley 14 (34). Attach the Pulley and two Finger Guards (35) to the Top Frame (4) with an M10 x 46mm Bolt (53) and an M10 Nylon Locknut (68). 15. Attach the end of the High Cable (50) to the 15 Small "U"-bracket (11) with an M8 Washer (71) and an M8 Nylon Locknut (69). Note: Do not completely tighten the Locknut; it should be threaded onto the Cable so that two threads 71 show past the Locknut, as shown in the inset drawing. 69 Attach the Small "U"-bracket (11) to the Weight Tube (12) with an M8 x 45mm Bolt (60) and an M8 Nylon Locknut (69). Do not overtighten the Locknut; the Weight Tube must be able to pivot in the Small "U"-bracket. 53 35 4 34 35 68 50 60 11 12 50 11 69 16. Locate the Press Cable (49). Slide the Cable 16 onto the hook on the Left Arm (7). Hook 49 17. Apply grease to an M10 x 78mm Bolt (54). Attach 17 the Pulley Arm (38) to the Upright (3) with the Bolt and an M10 Nylon Locknut (68). Do not over- tighten the Locknut; the Pulley Arm must be able to pivot easily. Wrap the Press Cable (49) over a 90mm Pulley (34). Attach the Pulley, a Cable Trap (36), an M10 Washer (70), and two Finger Guards (35) to the indicated side of a Pulley Arm (38) with an M10 x 52mm Bolt (52) and an M10 Nylon Locknut (68). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 10 7 3 54 68 35 36 38 52 70 34 35 49