Weslo Momentum 635 Elliptical English Manual - Page 7

4. Identify the Left Pedal Arm (21), which is marked with a "Left" sticker. Attach a Pedal (19) to the Left Pedal Arm with three M4 x 19mm Screws (68) and three Star Washers (85). Attach the other Pedal (not shown) to the Right Pedal Arm (not shown) in the same way. 4 21 85 19 85 68 5. Apply a small amount of grease to a Wave Washer (27) and slide it onto one end of the Pivot Axle (16). Next, slide an M8 Washer (64) and a Pivot Cover (14) onto an M8 x 23mm Shoulder Screw (65), and tighten the Button Screw into the Pivot Axle. Apply a generous amount of grease to the Pivot Axle (16). Identify the Left and Right Upper Body Legs (6, 7), which are marked with "L" and "R" stickers. While another person aligns the Left and Right Upper Body Legs with the Upright (2) as shown, insert the Pivot Axle into the Upper Body Legs and the Upright. Be careful not to damage the Upper Wire Harness (18) with the Pivot Axle. Apply a generous amount of grease to a Wave Washer (27), and place it on the end of the Pivot Axle (16). Next, slide an M8 Washer (64) and a Pivot Cover (14) onto an M8 x 23mm Shoulder Screw (65), and tighten the Button Screw into the Pivot Axle. Make sure that the Wave Washer remains on the end of the Pivot Axle. 5 Hexagonal Holes Grease 14 64 27 65 18 Grease 2 65 14 64 27 16 7 6 6. Apply a generous amount of grease to the axle on the Upper Body Leg (6). Then, apply grease to a Large Wave Washer (20) and slide it onto the axle. Apply a generous amount of grease to the Left Crank Arm (42). Then, slide an Inner Crank Arm Bushing (26) onto the Left Crank Arm. Make sure the flat side of the Inner Crank Arm Bushing is facing away from the Left Crank Arm. Slide the Left Pedal Arm (21) onto the Left Upper Body Leg (6) and the Left Crank Arm (42). Repeat this step for the other side of the elliptical exerciser. 6 6 Grease 20 21 7 Grease 42 26