Western Digital My Book VelociRaptor Duo User Manual - Page 27

MY BOOK VELOCIRAPTOR DUO USER MANUAL 7. Lift and loosen the thumbscrew that secures the drive cover plate and remove the plate: 2 1 3 8. Using the pull tab, carefully lift the faulty drive out of the enclosure: Note: Though the drives are labeled Drive A and Drive B, it is their enclosure locations that determine the drive designations used by the WD Drive Utilities software. As you view them from the front of the enclosure: The drive in the . . . enclosure slot Left Right Is drive . . . A B Switching the drives from one enclosure slot to the other would have no impact on the operation of your My Book VelociRaptor Duo device or the WD Drive Utilities software. If you do that, just remember that regardless of the label on the drive, the status and configuration of: • "Drive A" refers to the drive in the left enclosure slot • "Drive B" refers to the drive in the right enclosure slot REPLACING A DRIVE - 23