Westinghouse MT10 FLIP Installation Instructions
Westinghouse MT10 FLIP - Mounting Kit For LCD TV Manual
 |
UPC - 882777610015
View all Westinghouse MT10 FLIP manuals
Add to My Manuals
Save this manual to your list of manuals |
Westinghouse MT10 FLIP manual content summary:
- Westinghouse MT10 FLIP | Installation Instructions - Page 1
TVs weighing up to 10 lb and VESA® 75 and VESA® 100 mounting patterens Model: MT10 FLIP Max Load 10 lb (4.5 kg) IMPORTANT! Read entire instruction TV. As an alternative means of mounting, the mount can still be fastened when it is extended 2" past the front of the mounting the Westinghouse Web Site - Westinghouse MT10 FLIP | Installation Instructions - Page 2
mounting, please make sure that mounting screws turn at least three complete turns in the screen inserts. FOR VESA 75 MOUNTING as indicated below. FOR VESA 100 MOUNTING PATTERN: 1.) Choose hole pattern indicated illustrated 2 of 5 Visit the Westinghouse Web Site at www.westinghousedigital.com - Westinghouse MT10 FLIP | Installation Instructions - Page 3
top of the TV mount in a different location in the slot. Carefully hold the closed mount with the TV against the bottom of your cabinet. Make sure that there is enough clearance between the back of the TV " 1.25" TOP VIEW D or F E or G 3 of 5 Visit the Westinghouse Web Site at - Westinghouse MT10 FLIP | Installation Instructions - Page 4
step 4. Wind helical wrap (J) around all cords from back of LCD TV, as shown. Place cord clips (H) as needed, to better manage the side of the mount. Note: Make sure all slack is pulled out with mount fully open before replacing cord cover. Cord Cover 4 of 5 Visit the Westinghouse Web Site at www - Westinghouse MT10 FLIP | Installation Instructions - Page 5
-users of this Westinghouse television mounting product (the service or repairs by anyone other than personnel authorized by Westinghouse Digital Electronics, (b) the failure to utilize proper packing when returning the product, (c) improper installation or the failure to follow Product instructions
-
1 -
2 -
3 -
4 -
5
 |
 |
ISSUED: 04-16-04
SHEET #: 090-9101-1
1 of 5
Visit the Westinghouse Web Site at
www.westinghousedigital.com
For customer service call
1-866-287-5555
.
IMPORTANT!
Read entire instruction sheet before you start assembly and installation.
MT10 FLIP
Model:
PART LIST
K
E
J
I
QTY.
DESCRIPTION
A
090-0238
1
LCD assembly
B
095-4101
1
adapter plate
C
520-2027
4
M4 x .7 x 10 mm phillips screw
D
520-2099
4
10-32 x 1.25” phillips screw
E
540-9443
4
.219 x .5 x .25 nylon spacer
F
520-2100
4
10-32 x 2” phillips screw
G
540-9465
4
.219 x .5 x .88 nylon spacer
H
560-1134
3
cord clip
I
540-9442
8
#10 SAE washer
J
590-1122
1
2’ helical wire wrap
K
520-2005
4
M5 x .8 x 10 mm phillips
L
540-9447
4
1/4 split washer
M
504-2013
4
M4 x 12 mm phillips screw
N
590-5003
4
.198 x .313 x .437 retaining spacer
O
504-2014
4
M4 x 20 mm phillips screw
Some parts may not appear exactly as illustrated.
B
C
G
D
H
Part #
Installation & Assembly -
Under Cabinet
Swivel Mount for LCD TVs
L
M
O
N
F
A
Max Load 10 lb (4.5 kg)
This product is intended for use with 10” to 15" LCD TVs
weighing up to 10 lb and VESA
®
75 and VESA
®
100
mounting patterens
Important, read before installation:
In order to locate the mount completely under
the cabinet, the cabinet depth should be at least 1.5" more than the height of the TV.
This depth may be more depending on the width and shape of your TV.
As an alterna-
tive means of mounting, the mount can still be fastened when it is extended 2" past the
front of the mounting surface which will add 2" of depth to your cabinet.