Whirlpool KGSK901SSS Use and Care Guide - Page 24
Oven Door, Storage Drawer, Warming Drawer - installation instructions
View all Whirlpool KGSK901SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Oven Door For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy. To Remove: 1. Open oven door all the way. 2. Flip up the hinge latch on each side. Storage Drawer The storage drawer can be removed. Before removing, make sure drawer is cool and empty. To Remove: 1. Pull drawer straight out to the first stop. 2. Lift up the back of the drawer and pull out. To Replace: 1. Fit the ends of the drawer rails into the guides in the cavity. 2. Slide the drawer closed. 3. Close the oven door as far as it will shut. 4. Lift the oven door while holding both sides. Continue to push the oven door closed and pull it away from the oven door frame. Warming Drawer (on some models) Remove all items from inside the warming drawer, and allow the warming drawer to cool completely before attempting to remove the drawer. To Remove: 1. Open drawer to its full open position. 2. Locate the blackloops on both sides of the drawer. To Replace: 1. Insert both hanger arms into the door. A A. Loop 3. Pull both loops foward at the same time, then pull drawer out another inch. 2. Open the oven door. You should hear a "click" as the door is set into place. 3. Move the hinge levers back to the locked position. Check that the door is free to open and close. If it is not, repeat the removal and installation procedures. 4. Holding the drawer by its sides, not its front, slowly pull it all the way out. To Replace: 1. Align the drawer glides with the receiving guides. 2. Push drawer in all the way. 3. Gently open and close the drawer to ensure it is seated properly on the slides. 24