Whirlpool RBS245PDT User Manual - Page 13
Oven Lights, Oven Door, OVEN AND ROASTING RACKS, BROILER PAN AND GRID, To Replace, To Remove
View all Whirlpool RBS245PDT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
OVEN AND ROASTING RACKS ■ Self-Cleaning cycle: See "Self-Cleaning Cycle" first. Remove racks or they will discolor and become harder to slide. If this happens, a light coating of vegetable oil applied to the rack guides will help them slide. ■ Steel wool pad BROILER PAN AND GRID Do not clean in the Self-Cleaning cycle. ■ Mildly abrasive cleanser: Scrub with wet scouring pad. ■ Solution of ¹ ₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water: Soak for 20 minutes, then scrub with scouring or steel wool pad. ■ Oven cleaner: Follow product label instructions. Porcelain enamel only, not chrome ■ Dishwasher Oven Lights The oven lights are standard 40-watt appliance bulbs. They will come on when the oven door is opened. On double oven models with self-clean upper and lower ovens, all oven lights will come on when either door is opened. On double oven models with standard-clean lower ovens, the oven lights will not come on when the lower oven door is opened. The oven lights will not work during the Self-Cleaning cycle. When the oven door is closed, touch LIGHT to turn them on or off. To Replace: Before replacing, make sure the oven is off and cool. 1. Disconnect power. 2. Turn the glass bulb cover in the back of the oven counterclockwise to remove. Oven Door For normal range use, it is not suggested to remove the oven door. However, if necessary, follow these instructions. The oven door is heavy. To Remove: 1. Open oven door all the way. 2. Flip up the hinge latch on each side. 3. Close the oven door as far as it will shut. 4. Lift the oven door while holding both sides. Continue to push the oven door closed and pull it away from the oven door frame. To Replace: 1. Insert both hanger arms into the door. 3. Turn bulb counterclockwise to remove from socket. 4. Replace bulb and bulb cover by turning clockwise. 5. Reconnect power. 2. Open the oven door. You should hear a "click" as the door is set into place. 3. Move the hinge levers back to the locked position. Ensure that the door is free to open and close. If it is not, repeat the removal and installation procedures. 13