Whirlpool UXT4130ADS Installation Guide - Page 9
Warning
View all Whirlpool UXT4130ADS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
12. Make Electrical Connection A B C Option 1 - Direct Wire Installations ■ Use a UL Listed/CSA Approved wire connector and connect the 2 white wires (A) together. ■ Use a UL Listed/CSA Approved wire connector and connect the 2 black wires (B) together. WARNING Option 2 - Power Cord Kit Installations For optional power cord kit installations, follow the instructions supplied with the power cord kit. See the "Assistance or Service" section for information on ordering. NOTE: Use only with range hood cord connection kits that have been investigated and found acceptable for use with this model range hood. 13. Complete the Installation ■ Install a 120V, 75W maximum, incandescent light bulb with E26 base. See "Replacing the Incandescent Light Bulb" in the "Range Hood Care" section. ■ If removed previously, replace the filter. See "Metal or Charcoal Grease Filter" in the "Range Hood Care" section. - For vented installations: Install a metal filter. - For non-vented (recirculating) installations: Install a charcoal filter. ■ Check the operation of the range hood fan and light. See the "Range Hood Use" section. If the range hood does not operate, check to see whether a circuit breaker has tripped or a household fuse has blown. Disconnect the power and check the wiring connections. NOTE: To get the most efficient use from your new range hood, read the "Range Hood Use" section. Fire Hazard Electrically ground the blower. Use copper wire. Connect ground wire to green ground screw in terminal box. Failure to do so can result in death, fire, or electrical shock. ■ Connect the green (or bare) ground wire (C) from the power supply to the green ground screw in the electrical box and tighten the screw securely. Reinstall the electrical box cover. Reconnect power. 9