Whirlpool WDF520PAD Owners Manual - Page 9
Option Selections Cont., Controls And Cycle Status
View all Whirlpool WDF520PAD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPTION SELECTIONS (cont.) OPTIONS CAN BE SELECTED WITH WHAT IT DOES ADDED TIME ADDED TO CYCLE WATER GALLONS (LITERS) Dries dishes with heat. This option, with the Sensor Uses heating 0:08 to 0:46 0 use of rinse aid, will provide the best drying Heavy element to speed performance. Plastic items are less likely to Normal drying times. deform when loaded in the top rack. Use Heat Dry Soak & Clean Heat Dry option for optimum dry performance. Turn the Heat Dry defaults to On option off for air dry. when any cycle is selected except for 1-Hour Wash. Runs dishwasher at a later time. Select a wash Available with Delay 4 hours 0 0 cycle and options. Each time you press the delay any cycle button, it will display the next available delay time. Press 4-Hr Delay. Press START/RESUME. Close door firmly. NOTES: ■■ The dishwasher remembers the last Delay you selected. To reset the delay time to something other than what is displayed, continue to press the Delay button until the desired delay time is reached. ■■ Anytime the door is opened (such as, to add a dish); START/RESUME must be pressed again to resume delay countdown. To turn on lock, press and hold "4-Hr Delay" button for 3 seconds. Control Lock light will stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, light flashes 3 times. Dishwasher door can still be opened/closed while the controls are locked. To turn off Lock, press and hold "4-Hr Delay" button for 3 seconds. Light turns off. CONTROLS AND CYCLE STATUS CONTROL PURPOSE COMMENTS Press to start or resume a wash cycle. If the door is opened during a cycle or the power is interrupted, the Start/Resume button LED flashes. Cycle will not resume until door is closed and Start/Resume is pressed. Press to cancel wash cycle. Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain completely. Press Cancel again to fully cancel machine. The Clean indicator glows when a cycle is finished. 9