Whirlpool WED9150WW Installation Instructions - Page 18

6. Turn on cold water faucet 2. Move dryer to final location Check that the water faucets are turned on. 7. Check for leaks Move dryer to final location. Avoid crushing or kinking vent. After dryer is in place, remove cardboard from under dryer. Level dryer 1. Level Dryer Check for leaks around "Y" connector, faucets, and hoses. Connect Vent 1. Connect vent to exhaust outlet Place level here Check levelness of dryer from side to side. Repeat from front to back. NOTE: The dryer must be level for the moisture sensing system to operate correctly. Using a 4" (102 mm) clamp, connect vent to exhaust outlet in dryer. If connecting to existing vent, make sure vent is clean. Dryer vent must fit over dryer exhaust outlet and inside exhaust hood. Check that vent is secured to exhaust hood with a 4" (102 mm) clamp. Not Level LEVEL Not Level 18