Whirlpool WED9620HC Owners Manual - Page 19

TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/owners (in Canada www.whirlpool.ca/owners) for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Dryer Displaying Code Message or Indicator Is Lit (cont.) Check Vent pop-up screen is displayed The lint screen or vent is clogged; the vent is crushed or kinked or has too many turns. The dryer will continue to run when this pop-up screen is displayed. Try the following: • Clean lint screen. • Check to see if the vent run from the dryer to the wall is crushed or kinked. • Confirm that the vent run from the dryer to the wall is free of lint and debris. • Confirm that the exterior vent exhaust hood is free of lint and debris. • Confirm that your vent system falls within the recommended run length and number of elbows for the type of vent you are using. Refer to "Plan Vent System" in the Installation Instructions for details. • Select a Timed Dry heated cycle and restart the dryer. • If the pop-up screen displays, have your entire home venting run cleaned. Controls are locked The Control Lock is enabled. Touch the TOOLS button, go to Control Lock icon, and swipe up to unlock the controls of the dryer. 19