Whirlpool WEL98HEBU Installation Guide - Page 19

Reverse outer window assembly, Rotate and reassemble outer window, assembly to trim ring

Get Whirlpool WEL98HEBU PDF manuals and user guides View all Whirlpool WEL98HEBU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

5. Reverse outer window assembly Handle 6. Rotate and reassemble outer window assembly to trim ring Bottom of door Notches A A Handle B Using a Phillips screwdriver, remove the 4 screws from the outer window retainer and lift off the trim ring off the window (A). Rotate trim ring 180° and secure with the 4 screws removed earlier (B). B With the edge with 2 notches at the top, align the notches on the outer window assembly with the tabs on the trim ring and lower into place as shown in figure A. Rotate the outer window assembly counterclockwise to lock tabs into place (figure B). Using a Phillips screwdriver, secure with 2 screws removed earlier. IMPORTANT: Do not overtighten. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
19
5.
Reverse outer window assembly
Using a Phillips screwdriver, remove the 4 screws from the
outer window retainer and lift off the trim ring off the window
(A). Rotate trim ring 180° and secure with the 4 screws
removed earlier (B).
Handle
A
B
Handle
6.
Rotate and reassemble outer window
assembly to trim ring
With the edge with 2 notches at the top, align the notches on
the outer window assembly with the tabs on the trim ring and
lower into place as shown in figure A.
Rotate the outer window assembly counterclockwise to lock
tabs into place (figure B). Using a Phillips screwdriver, secure
with 2 screws removed earlier.
IMPORTANT
: Do not overtighten.
A
B
Bottom
of door
Notches