Whirlpool WEL98HEBU Installation Guide - Page 20

7. Remove hinge and latch Latch 9. Reinstall inner door assembly Bottom of door Hinge Using a Torx® † T25 screwdriver, remove the 3 Torx screws securing the latch plate and latch backing plate and the 5 screws holding the hinge assembly in place. 8. R einstall hinge and latch on opposite sides Position the door with the inside of the door facing up. Reinstall the 10 screws securing the inner door to the outer door. 10. Reinstall door on dryer Using a Torx® † T25 screwdriver, reinstall the latch plate, latch backing plate, and hinge assembly on the opposite sides from which they were removed. Using a Torx® † T25 screwdriver, remove the 4 screws on the dryer. Insert the tabs on the hinge into the mounting slot and slide down to engage the top tab. Secure in place with the 4 Torx® † T25 screws removed earlier. † ® TORX is a registered trademark of Saturn Fasteners, Inc. W10423118A W10423119A - SP © 2011 All rights reserved 6/11 Printed in U.S.A.