Whirlpool WFG320M0BS Installation Guide - Page 13

To Convert Gas Pressure Regulator 1. Open broiler door and remove broiler rack. The gas pressure regulator is located in the back right hand corner of the broiler compartment. A To Convert Surface Burners 1. Remove burner grate, burner caps and burners. A. Gas pressure regulator IMPORTANT: Do not remove the gas pressure regulator. NOTE: Do not remove the spring beneath the cap. 2. Remove the cap from the gas pressure regulator using a flat-blade screwdriver. NOTE: Be sure sealing washer remains in the same position. A A B A. Burner cap B. Burner 2. Locate LP gas orifice spuds for top burners in the bag containing literature included with the range. One LP gas spud is stamped "88 (Yellow/Black)," two are stamped "116 (Yellow/Orange)," and one is stamped "70 (Yellow/White)." 3. Remove Natural gas orifice spuds using a 7 mm combination wrench. 4. Install LP gas orifice spuds using a 7 mm combination wrench. A. Cap 3. To convert to LP gas, unscrew the plastic adjustment screw by hand, turn it over, and screw it in again. Inlet pressure Inlet pressure to Natural gas to LP gas A B C 4. Reinstall the cap. 180º A. Cap B. Sealing washer C. Adjustment screw A B A. Spud B. Holder 13