Whirlpool WFG710H0AH Use & Care Guide - Page 5

KEYPAD BROIL CONVECT KEEP WARM START TIME COOK TIME RAPID PREHEAT WARMING DRAWER ON/OFF CLEAN CONTROL LOCK hold 3 sec. to lock SETTINGS ENERGY SAVE FEATURE INSTRUCTIONS Broiling 1. Press BROIL. 2. Select the broiling temperature by pressing 1 - high (500°F [260°C]), 2 - medium (450°F [232°C]) or 3 - low (400°F [204°C]). The default setting is high. 3. Press START and allow the oven to preheat for 5 minutes. 4. Position the cookware in the oven and close the door. 5. Press CANCEL when finished. Convection cooking 1. Press CONVECT once to select convection baking. For convection roasting, press CONVECT a second time. Press CONVECT a third time for convection broiling. 2. Press the number keypads to set a temperature other than 350°F (177°C) in 5° increments between 170°F and 500°F (77°C and 260°C). 3. Press START. The temperature will be reduced by 25°F (15°C) 4. To change the temperature, repeat steps 1 and 2. Press START or wait 5 seconds for the change to take effect. 5. Press CANCEL when finished. Hold warm Food must be at serving temperature before placing it in the warmed oven. 1. Press KEEP WARM. 2. Set temperature between 145°F (63°C) and 190°F (88°C) using the number keypads. The default temperature is 170°F (75°C). 3. Press START. 4. Press CANCEL when finished. Delayed start The START TIME keypad is used to enter the starting time for an oven function with a delayed start. Cook time Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of time, and/or shut off automatically. Delay start should not be used for foods such as breads and cakes because they may not bake properly. To set a Cook Time or a Delayed Cook Time, see "Cook Time" section. Rapid oven preheating Provides the fastest preheat time for the BAKE function. 1. Press RAPID PREHEAT. 2. Press the number keypads in response to the scrolling text to enter the Bake temperature. 3. Press START. 4. A reminder tone will sound when the preheat temperature is reached. Place food inside the oven. NOTE: This feature should only be used for one-rack baking. Unused racks should be removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat. If preheating for the Bake cycle has already started, Rapid Preheat may be started directly by pressing RAPID PREHEAT. Warming drawer (on some models) 1. Press WARMING DRAWER to select the Warming Drawer function at the Low setting. 2. To select a higher temperature setting, press WARMING DRAWER a second time for the Medium setting and a third time for the High setting. 3. Press START to begin preheating the warming drawer. 4. Allow the warming drawer to preheat for 15 minutes. 5. Place the cooked food(s) in the warming drawer 6. Press WARMING DRAWER to turn off the heating element. Clean cycle See the "Range Care" section. Oven control lockout No keypads will function with the controls locked. 1. Check that the oven and the Timer are off. 2. Press and hold the START keypad for 3 seconds. 3. If enabled, a tone will sound, and "CONTROL LOCKED" will be displayed. 4. Repeat to unlock. Oven use functions Enables you to personalize the audible tones and oven operation to suit your needs. See the "Oven Use" section. Blanks display to reduce energy usage 1. Press ENERGY SAVE to change status. The display will scroll "ENERGY SAVE ON" or "ENERGY SAVE OFF." If Energy Save is on, the display will go blank after 5 minutes of inactivity. Any key press will activate the display. If Energy Save is off, the display will be on at all times. 5