Whirlpool WGD5800BW Installation Guide - Page 16

10. Remove door strike and door strike plug 12. Insert screws in hinge holes on dryer cabinet Door strike Door strike plug Remove door strike and door strike plug from dryer cabinet. Insert the door strike into door strike plug hole and secure with screw. Insert door strike plug into original door strike hole and secure with screw. 11. Remove and transfer hinge hole plugs NOTE: Two people may be needed to reinstall door. Insert screws into the bottom holes on left side of dryer cabinet. Tighten screws halfway. Position door so large end of door hinge slot is over screws. Slide door up so screws are in bottom of slots. Tighten screws. Insert and tighten top screws in hinges. 13. Check door strike alignment Use a small, flat-blade screwdriver to gently remove 4 hinge hole plugs on left side of dryer cabinet. Transfer plugs into hinge holes on opposite side of dryer cabinet. Close door and check that door strike aligns with door catch. If it is needed, slide door catch left or right within slot to adjust alignment. 27" Wide Model Side-Swing Door 1. Place towel on dryer Place towel on top of dryer to avoid damaging the surface. 16