Whirlpool WGD5800BW Installation Guide - Page 20

6. Remove screws from door 9. Attach door hinges Remove screws at top, bottom, and side of door (4 screws). Keep door screws separate from hinge screws as they are different sizes. 7. Separate inner from outer door Holding door over towel on dryer, pry inner door and lift to separate it from outer door. NOTE: Do not pull on door seal or plastic door catches. 8. Rotate outer door Reattach door hinges to dryer door so that the larger hole is at the bottom of the hinge. 10. Remove door strike and door strike label Door strike Door strike label Rotate outer door 180º and set it back down on inner door. Be certain to keep cardboard spacer centered between doors. Reattach outer door panel to inner door panel so handle is on the side where hinges were just removed. Insert 4 door screws. Remove door strike and door strike label from dryer cabinet. Insert the door strike into hole where door strike label was removed and secure with screw. Cover original door strike hole with door strike label and press firmly into place. 20