Whirlpool WGD6400SB Use and Care Manual - Page 12

Reinstall the door

Get Whirlpool WGD6400SB PDF manuals and user guides View all Whirlpool WGD6400SB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

3. Loosen the top screw from each of the 2 hinges in Step 2. A B Reverse the strike 1. Remove the door strike from the dryer door opening. 2. Remove the cosmetic screw opposite the door strike. .A "B A. Loosen these screws. B. Remove these screws. 4. Remove the dryer door and the hinges by lifting upward on the door. Lay the door on a flat, protected surface, with the inside of the door facing up. Remove remaining 2 loose screws from dryer front panel. 5. Remove the 4 plastic plugs located outside the dryer door opening. I A. Door strike B. Cosmetic screw 3. Reinstall the door strike and cosmetic screw on the opposite side of the dryer door opening from where they were removed. NOTE: Door strike and plugs must be on the same side of the dryer door opening. Reinstall the door 1. Remove the 4 screws and 2 hinges from the dryer door. 2. Replace the 4 screws in the same holes. 6= Install 4 plastic plugs into screw holes in the dryer left where the hinges were removed in Step 4. 3. Remove the 4 screws from the opposite side of the door. I 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
3.
Loosen the top screw from each of the 2 hinges in Step 2.
A
B
.A
"B
Reverse
the strike
1.
Remove the door strike from the dryer door opening.
2.
Remove the cosmetic
screw opposite
the door strike.
A. Loosen
these screws.
B. Remove
these screws.
4.
Remove the dryer door and the hinges by lifting upward
on
the door. Lay the door on a flat, protected
surface, with the
inside of the door facing
up. Remove
remaining
2 loose
screws
from dryer front panel.
5.
Remove the 4 plastic
plugs
located
outside
the dryer door
opening.
6=
I
Install 4 plastic
plugs into screw
holes in the dryer left where
the hinges were removed
in Step 4.
A. Door strike
B. Cosmetic
screw
3.
Reinstall the door strike and cosmetic
screw on the opposite
side of the dryer door opening from where they were
removed.
NOTE: Door strike and plugs must be on the same side of the
dryer door opening.
Reinstall the door
1.
Remove the 4 screws
and 2 hinges from the dryer door.
2.
Replace the 4 screws
in the same holes.
3.
Remove the 4 screws
from the opposite
side of the door.
I
12