Whirlpool WGD8127L Owners Manual - Page 23
Remove the door assembly
View all Whirlpool WGD8127L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Remove the door assembly: 1. Lay the door on a flat, covered surface with the inside of the door facing up. Remove the 3 plugs with a plastic putty knife. There is a cut out to stick the putty knife under to pop out. 3. Remove the inner door by using a plastic putty knife to separate the sides and bottom of the dryer door and trim. There are 2 snaps on left, right, and bottom of door. Insert the putty knife next to the snaps. 2. Remove the 8 screws from the dryer door and setscrews off to the side. 4. When you have the door separated from the frame, use a putty knife to lift up in the center tab and then pull door toward you and out. 23
23
Remove the door assembly:
1.
Lay the door on a flat, covered surface with the inside of
the door facing up. Remove the 3 plugs with a plastic putty
knife. There is a cut out to stick the putty knife under to pop
out.
2.
Remove the 8 screws from the dryer door and setscrews off
to the side.
3.
Remove the inner door by using a plastic putty knife to
separate the sides and bottom of the dryer door and trim.
There are 2 snaps on left, right, and bottom of door. Insert
the putty knife next to the snaps.
4.
When you have the door separated from the frame, use
a putty knife to lift up in the center tab and then pull door
toward you and out.