Whirlpool WGE555S0BB Installation Guide - Page 6
Warning
View all Whirlpool WGE555S0BB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
WARNING Install Anti-Tip Bracket 3. Determine and mark edge of range in the cutout space. The mounting bracket can be installed on either the left side or right side of the cutout. Position mounting bracket in cutout so that right (or left) edge of the bracket is 2.4 cm) from the marked edge of the range, as shown. A Tip Over Hazard A child or adult can tip the range and be killed. Install anti-tip bracket to floor or wall per installation instructions. Slide range back so rear range foot is engaged in the slot of the anti-tip bracket. Re-engage anti-tip bracket if range is moved. Do not operate range without anti-tip bracket installed and engaged. Failure to follow these instructions can result in death or serious burns to children and adults. 1. Remove the anti-tip bracket that is taped inside the upper oven with the package containing literature. 2. Determine which mounting method to use: floor or wall. If you have a stone or masonry floor, you can use the wall mounting method. B C A. Anti-tip bracket B. Mark edge of range. C 2.4 cm) 4. Drill two ¹⁄₈" (3.0 mm) holes that correspond to the bracket holes of the determined mounting method. See the following illustrations. Floor Mounting Wall Mounting A B A B A. #12 x 1⁵⁄₈" screws B. Anti-tip bracket A. #12 x 1⁵⁄₈" screws B. Anti-tip bracket 5. Using a Phillips screwdriver, mount anti-tip bracket to the wall or floor with the two #12 x 1⁵⁄₈" screws provided. 6