Whirlpool WOC95EC0A Installation Instructions - Page 5

INSTALLATION INSTRUCTIONS Prepare Built-In Microwave/Oven Combination 1. Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during installation. 4. Partially close the door to engage the door latch locks. The door will stop at this point. WARNING Excessive Weight Hazard Use two or more people to move and install oven. Failure to do so can result in back or other injury. 2. To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. 3. Remember to remove bottom vent from the foam packing on top of oven. 4. Remove the shipping materials and tape from the oven. 5. Remove the hardware package from inside the bag containing literature. 6. Remove and set aside racks and other parts from inside the oven. 7. Move oven and cardboard close to the oven's final location. Remove Oven Door(s) IMPORTANT: Use two hands to remove oven door. 1. Prior to removing the oven door, prepare a surface where you will place it. This surface should be flat and covered with a soft blanket, or use the corner posts from your packaging material. 2. Open the oven door. 3. Locate the oven door hinge locks in both corners of the oven door, and rotate the hinge locks toward the oven door to the unlocked position. If the door hinge lock is not rotated fully (see illustration B), the door will not remove properly. A B 5. Using two hands, grasp the edges of the oven door. Lift and pull the oven door toward you and remove. You may need to gently shift door from side to side as you pull. 6. Set the oven door(s) aside on the prepared covered work surface, with the oven door resting on its handle. 7. To continue with the oven installation, go to the "Positioning Oven Feet for Multiple Cabinet Cutout Heights" section. Replace Oven Door(s) IMPORTANT: Do not replace the oven door(s) until after the oven has been installed into the cabinet. 1. Using two hands, grasp side edges of door at the midpoint. Face the oven cavity. 2. Locate the slots on each side of the oven cavity for the door hinge locks. A. Oven door hinge lock in locked position B. Oven door hinge lock in unlocked position A A. Slot in the oven cavity for door hinge lock 5