Whirlpool WOEC5030LZ Owners Manual - Page 11

INSTALLATIONS, Prepare Built-In Oven, Remove Oven Door(s)

Get Whirlpool WOEC5030LZ PDF manuals and user guides View all Whirlpool WOEC5030LZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

INSTALLATIONS Prepare Built-In Oven 1. Decide on the final location for the oven. Avoid drilling or cutting into house wiring during installation. WARNING Excessive Weight Hazard Use two or more people to move and install or uninstall appliance. Failure to do so can result in back or other injury. 3. Locate the oven door hinge locks in both corners of the oven door, and rotate the hinge locks toward the oven door to the unlocked position. If the door hinge lock is not rotated fully (see unlocked position in illustration), the door will not remove properly. Oven door hinge lock in locked Oven door hinge lock in unlocked position position 2. To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. 3. Remember to remove bottom vent from the foam packing on top of oven. 4. Remove the shipping materials and tape from the oven. Remember to keep the corner posts and other materials that may be needed for installation. 5. Remove the hardware package from inside the bag containing literature. 6. Remove and set aside racks and other parts from inside the oven. 7. Move oven and cardboard close to the oven's final location. Remove Oven Door(s) IMPORTANT: Use 2 hands to remove oven door. For double ovens, repeat the process for each door. 1. Prior to removing the oven door, prepare a surface where you will place it. This surface should be flat and covered with a soft blanket, or use the corner posts from your packaging material. 2. Fully open the oven door. A. Grip here to rotate 4. Gently start to close the door. The door will stop at a partially closed position. 5. Using 2 hands, grasp the edges of the oven door. Close the oven door slightly past the stop position to take the weight off of the door hinges, and then pull the oven door up. A. Door hinges 6. Pull the oven door toward you, and then remove. You may need to gently shift door from side to side as you pull. 7. Set the oven door aside on the prepared covered work surface with the oven door resting on its handle. 8. To continue with the oven installation, go to the "Positioning Oven Feet for Multiple Cabinet Cutout Heights" section. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
11
INSTALLATIONS
Prepare Built-In Oven
1.
Decide on the final location for the oven. Avoid drilling or
cutting into house wiring during installation.
WARNING
Excessive Weight Hazard
Use two or more people to move and install or uninstall
appliance.
Failure to do so can result in back or other injury.
2.
To avoid floor damage, set the oven onto cardboard prior to
installation. Do not use handle or any portion of the front frame
for lifting.
3.
Remember to remove bottom vent from the foam packing on
top of oven.
4.
Remove the shipping materials and tape from the oven.
Remember to keep the corner posts and other materials
that may be needed for installation.
5.
Remove the hardware package from inside the bag containing
literature.
6.
Remove and set aside racks and other parts from inside the
oven.
7.
Move oven and cardboard close to the oven’s final location.
Remove Oven Door(s)
IMPORTANT:
Use 2 hands to remove oven door. For double
ovens, repeat the process for each door.
1.
Prior to removing the oven door, prepare a surface where you
will place it. This surface should be flat and covered with a soft
blanket, or use the corner posts from your packaging material.
2.
Fully open the oven door.
A.
Door hinges
3.
Locate the oven door hinge locks in both corners of the oven
door, and rotate the hinge locks toward the oven door to the
unlocked position. If the door hinge lock is not rotated fully
(see unlocked position in illustration), the door will not remove
properly.
Oven door hinge lock in locked
position
Oven door hinge lock in unlocked
position
A.
Grip here to rotate
4.
Gently start to close the door. The door will stop at a partially
closed position.
5.
Using 2 hands, grasp the edges of the oven door. Close the
oven door slightly past the stop position to take the weight off
of the door hinges, and then pull the oven door up.
6.
Pull the oven door toward you, and then remove. You may
need to gently shift door from side to side as you pull.
7.
Set the oven door aside on the prepared covered work
surface with the oven door resting on its handle.
8.
To continue with the oven installation, go to the
“Positioning Oven Feet for Multiple Cabinet Cutout
Heights” section.