Xbox 9Z5-00013 User Guide - Page 5

To enter a TV code: 1 Turn on your TV and point the remote toward it. 2 Press and hold the TV and OK buttons simultaneously for two seconds. All of the buttons on the remote will then light up for two seconds, after which only the numeric TV buttons (1-12) will stay on. 3 Enter the code for your TV. 4 Press the TV button again to save the code and exit. All of the buttons on the remote will blink three times to confirm your selection. To scan for a TV code: 1 Turn on your TV and point the remote toward it. 2 Press and hold the TV and OK buttons simultaneously for two seconds. All of the buttons on the remote will then light for two seconds, after which only the numeric TV buttons (1-12) will stay on. 3 Press the CH/PG button to send a series of off commands to your TV. Repeat until the TV turns off. Note Give your TV enough time to respond to the off command each time the button is pressed. Some TVs take more time to react to off commands than others. 4 Press the TV button to save the code and exit. All buttons on the remote will blink three times to confirm the code. Notes • After 30 seconds of inactivity, the remote will exit the TV programming mode. Pressing any button besides 0-9 or CH/PG returns the remote to its original settings. • If, after setting the TV code, you find that the remote is not functional or has incomplete or inaccurate functionality, try a different code for your TV manufacturer or scan for another code. To scan for another code after the TV turns off in step 3, turn the TV back on, then continue to press CH/PG for other codes prior to proceeding to step 4. • The universal remote works only with TVs, the Xbox 360 HD DVD Player, the Xbox 360 console, and Windows Media Centre- based PCs. It does not control VCRs, DVRs, other DVD players, or audio equipment. english