Xerox 3130 Service Manual - Page 35
Multi-Feeding, Paper rolled in the Fuser
UPC - 095205611984
View all Xerox 3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
TROUBLESHOOTING 4.3.5 Multi-Feeding • Description Multiple sheets of paper are fed at once. Check and Cause 1. Solenoid malfunction(the solenoid does not work properly): Perform DCU Diagnostic Code 06. 2. Pad-Friction is contaminated with foreign matter.(oil...) 3. The face of paper is blended. Solution 1. Replace the solenoid if necessary. 2. Clean the pad friction with soft clothe dampened with IPA(Isopropyl Alcohol). 3. Use the smooth paper. 4.3.6 Paper rolled in the Fuser • Description If contaminated at intervals of 57mm on the back of a paper. Check and Cause 1. Contamination of the pressure roller or heat roller (Background, Hot off set). 2. Check the claw of the fuser whether it is unfitted. Solution 1. After disassembling the fuser, clean contamination between the heat roller and the thermostor and remove the contamination of the pressure roller. 2. If there is heavy background, repair it by the background troubleshooting method. 3. The surface of the heat roller with IPA or water 4. Check the warp or separation of the sprint claw and the holder plate claw, and then manage it. Service Manual 4-15