Xerox 3400N Network Guide - Page 19

Network Protocols Network Protocols Determining enabled protocols All protocols can be enabled and disabled. The Configuration Sheet displays which protocols are enabled. Disabling and enabling protocols After your network configuration is complete, you may want to disable protocols that you are not using to avoid unnecessary network traffic. You can disable protocols by: I Using CentreWare DP (available July 2001) I Using the Phaser 3400 web server Disabling protocols using the Phaser 3400 web server To disable (or enable) protocols using the Phaser 3400 web server: 1. Open the Internet Explorer web browser (version 4.0 or higher). 2. For the Address, type http://, then the IP address of the Phaser 3400 printer, then press the Enter key. For example, if the IP address is 192.25.26.81, type: http://192.25.26.81 3. On the main page, click the Admin button. 4. Click on the appropriate protocol. 5. Click to check or uncheck the checkbox to enable or disable the protocol. 6. Click the Apply button. Network Guide 15