Xerox 4510DX User Guide - Page 15
Sample s, Power Saver Settings, Using the Control Panel, Using CentreWare IS - driver
UPC - 095205431117
View all Xerox 4510DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Control Panel 1. On the control panel, select Information, and then press the OK button. 2. Select Information Pages, and then press the OK button. 3. Select Configuration Page or Supplies Usage Page, and then press the OK button to print. Note: You can also print information pages from CentreWare Internet Services (IS) and from the printer driver. Sample Pages Your printer comes with a set of sample pages that demonstrate different printer functions. To print the sample pages: 1. On the control panel, select Information, and then press the OK button. 2. Select Sample Pages, and then press the OK button. 3. Select the desired sample page, and then press the OK button to print. See also: Advanced Features Guide at www.xerox.com/office/4510support Power Saver Settings Factory Default: ■ Power Saver: On ■ Power Saver Timeout: 4 minutes You can change the default power saver time on the control panel or through CentreWare IS. Using the Control Panel: 1. On the control panel, select Printer Setup > Printer Controls, then press the OK button. 2. Verify that Power Saver is On. If Power Saver is Off, then select Power Saver and press the OK button to switch between Off and On. 3. Select Power Saver Timeout to select the new time. 4. Press the OK button. Using CentreWare IS: 1. Launch your web browser. 2. Enter the printer's IP address in the browser's Address field. 3. Select Properties. 4. Select the General folder on the left nagivation panel, then click Printer Defaults. 5. In the User Preferences section, set the Power Saver option to On. 6. Select the new time from Power Saver Timeout. 7. Click the Save Changes button. Phaser® 4510 Laser Printer 1-9