Xerox 6100DN Using LCDS Print Description Language - Page 139

Specifying input parameters Table 2-31. Summary of PCC command parameters (Continued) Parameter LTHFLD OFFSET POSTAMBLE STRUCTURE Specifies Length of field containing record length Location of record length field Length of extraneous data at end of record Input record structure Online Offline DJDE Y N N Y N N Y N N Y N N The following sections describe the syntax of the command parameters and explain their options. PCC ADVTAPE Specifies whether or not the carriage control advances to a new page when two successive channel skip parameters are issued with no intervening print. For example, on most printers, the actions PSK1 (Print and Skip to Channel 1) followed by SK1N (Skip to Channel 1, Do Not Print) cause a blank page to be output. However, on a 1403 printer, these actions do not produce a blank page. Syntax [ac:] PCC ADVTAPE = {YES | NO} Options Table 2-32. PCC ADVTAPE parameter options and definitions Option Definition YES Specifies that multiple skips are honored. NO Specifies that multiple skips result in only one skip action being taken. Default No default PCC ADVTAPE parameter: point to note SK1P (skip to channel 1 and print) followed by a second SK1P results in a page transition because printing occurred on the first page, even if only blanks were output. PCC ASSIGN Specifies printer carriage control exceptions to a default table. Refer to the "PCC DEFAULT" parameter section in this chapter. Using LCDS Print Description Language 2-31