Xerox 6100DN Using LCDS Print Description Language - Page 317

Specifying print format parameters Options Table 4-69. OUTPUT PURGE parameter options and definitions Option Definition NO Specifies that graphic disk files should not be deleted. YES Specifies that all .IMG graphics files that were created or replaced by document interleaved graphic processing for this report should be deleted at the end of the report printing. Default YES OUTPUT PURGE parameter: point to note You can use the SAVE DJDE to override the purging of specific files. OUTPUT SF1FUNCTION Specifies to the third party finisher whether or not it should perform the user-defined SF1 operation on the current report. This parameter provides control over third party finishing devices that conform to the DFA standard. You use it to invoke Finishing Function SF1 through the DFA channel C6. The user must specify what function SF1 will have. Refer to your finishing equipment vendor documentation for information on what function should be specified for your finisher. Syntax OUTPUT SF1FUNCTION = {NO | YES} Options Table 4-70. OUTPUT SF1FUNCTION parameter options and definitions Option YES NO Definition Instructs the finisher to initiate the user-defined SF1 finishing function on the current sheet. Specifies that Finishing Function SF1 will not be implemented on the current sheet. Default NO Using LCDS Print Description Language 4-77