Xerox 6180N Getting Ready for the Xerox FreeFlow® Print Server Instal - Page 13

FREEFLOW PRINT SERVER 6.0.xx W-1 data element definitions Primary Network Interface: Product Controller/Server Value iGen3 PDSI Config 4 bge0 DocuColor (2XX, 5000, PDSi Config 2b, 7000/8000) 2c, 2d bge0 DocuTech 61XX PDSi Config 2a bge0 DocuPrint 1XX EPS DocuTech 61XX DocuPrint 1XX EPS SUN W1100z Determined automatically DocuTech 128/155/180 PDSi Config 2a HLC bge1 DocuTech 128/155/180 SUN W1100z ce1 HLC Xerox 41XX/45XX EPS, SUN Ultra 20 XXP Determined automatically Xerox Continuous Feed PDSi Config 4 bge1 Nuvera X86 Determined automatically DHCP: Dynamic Host Configuration Protocol. This is a TCP/IP addressing method. If selected, the system should automatically contact the DHCP server to obtain the IP address, subnet mask, and default gateway address. This information can also be manually entered into the FreeFlow Print Server Network Configuration screens. DHCP is the default for DocuColor 2XX. iGen3 may not use DHCP. Hostname: This is the name the print server will be known as by users from other host machines on the TCP/IP network. This name is an alias mapped to the IP address that is assigned to the print server/host machine. The Hostname must start with an alphabetic character, and cannot start with a number, space, or any other non-alphabetic character. IP Address: The lP or Internet Address is a unique 4 byte, 32 bit numeric value that is assigned to each local host and workstation on a TCP/IP network. An IP address consists of four fields, each separated by a decimal point. For example: 13.254.166.111. NOTE: The TCP/IP Internet spans the entire world. The Internet central committee assigns a set of unique network addresses to XEROX FREEFLOW PRINT SERVER 7 GETTING READY FOR THE PRINT SERVER INSTALLATION