Xerox 6180N Getting Ready for the Xerox FreeFlow® Print Server Instal - Page 29

Print Server Operator User Password

Page 29 highlights

FREEFLOW PRINT SERVER 6.0.xx Version 3.25 June 17, 1993 Hardware setting: I/O Port 320h to 33Fh, Interrupt 2h Node address: 00009B99E9B9 Frame type: ETHERNET II Boardname: DOCUTECH LAN protocol: ARP LAN protocol: IP address 13.254.166.111 mask FF.FF.FC.O Interrupt 2h LAN protocol: XNS LAN protocol: IPX network 0000BB09 Printer and queue names must be unique and can be made up of a maximum of 14 alphanumeric characters and underscores. Framing Type: Necessary for install and must be the same as the Novell File Server. The framing type is used to determine the following two data elements: ETHERNET_802.3 ETHERNET_Il NOTE: If the network will be running both Novell NetWare and AppleTalk, the framing type must be ETHERNET_Il. NOTE: Selecting multiple framing types may cause the network to slow down. Novell File Server Name: Enter the name of the file server on which the print queue, print server, and printer will be created or already reside. Novell Print Queue Name: This print queue will hold the print jobs until the Xerox server is ready. Enter the name for this queue in this column. Novell Print Server Name: The Novell print server submits the job from the queue to the Xerox server. Enter the name for this server in this column. Novell Print Server Password: The Novell Network administrator password. Print Server Operator User Name: The name of the Novell print server user with the capability to operate the Novell print server. The print server uses this operator account to manage operations with the Novell Server. Enter the full for this user as the data element. Print Server Operator User Password: The print server operator should be prepared to provide this information at the time of the gateway setup. Novell Printer Name: One printer, of a type Remote Other/Unknown, will be created at this time to represent the Xerox printer. Enter the name for the printer in this column, for example, DT6135, to represent a DocuTech 6135 printer. Novell Account Login: The user's Novell account user name and password. XEROX FREEFLOW PRINT SERVER 23 GETTING READY FOR THE PRINT SERVER INSTALLATION

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

FREEFLOW PRINT SERVER 6.0.xx
XEROX FREEFLOW PRINT SERVER
23
GETTING READY FOR THE PRINT SERVER INSTALLATION
Version 3.25 June 17, 1993
Hardware setting: I/O Port 320h to 33Fh,
Interrupt 2h
Node address: 00009B99E9B9
Frame type: ETHERNET II
Boardname: DOCUTECH
LAN protocol: ARP
LAN protocol: IP address 13.254.166.111
mask FF.FF.FC.O
Interrupt 2h
LAN protocol: XNS
LAN protocol: IPX network
0000BB09
Printer and queue names must be unique and can be made up
of a maximum of 14 alphanumeric characters and underscores.
Framing Type:
Necessary for install and must be the same as
the Novell File Server. The framing type is used to determine the
following two data elements:
ETHERNET_802.3
ETHERNET_Il
NOTE: If the network will be running both Novell NetWare and
AppleTalk, the framing type must be ETHERNET_Il.
NOTE: Selecting multiple framing types may cause the network
to slow down.
Novell File
Server Name:
Enter the name of the file server on
which the print queue, print server, and printer will be created or
already reside.
Novell Print Queue Name:
This print queue will hold the print
jobs until the Xerox server is ready. Enter the name for this
queue in this column.
Novell Print Server Name:
The Novell print server submits the
job from the queue to the Xerox server. Enter the name for this
server in this column.
Novell Print Server Password:
The Novell Network
administrator password.
Print Server Operator User Name:
The name of the Novell
print server user with the capability to operate the Novell print
server. The print server uses this operator account to manage
operations with the Novell Server. Enter the full <User Name>
for this user as the data element.
Print Server Operator User Password:
The print server
operator should be prepared to provide this information at the
time of the gateway setup.
Novell Printer Name:
One printer, of a type
Remote
Other/Unknown, will be created at this time to represent the
Xerox printer. Enter the name for the printer in this column, for
example, DT6135, to represent a DocuTech 6135 printer.
Novell Account Login:
The user’s Novell account user name
and password.