Xerox 6180N DocuSP Getting Started - Page 24

Set the True Type Spot Size to 1.4. Controls, TBD: Does going into DocuSP Network

Page 24 highlights

Caveat External finishing cannot be selected at the client using the IPP or HTTP gateways. Submit the job to the printer without any finishing, and select the external finisher at the DocuSP. Applicable printer product DocuPrint 1xx EPS DocuTech 61xx Jobs with a Layout custom template and 1 Up may complete with errors. In DocuSP 3.8, Offset was a system-level setting and ON by default. In DocuSP 4.x, Offset is a queue setting and is OFF by default. Check the queue setting for Offset to ensure it is set as needed. Using a streaming queue is not recommended. Jobs hang with a status of "Waiting for RIP." Custom ICC profile files may not be restored after a Configuration Restore. An FRF saved job displays incorrectly in the viewer, but prints correctly. Jobs print in serial mode when the administration pages and Page Parallel RIP are enabled. In order for jobs to print in parallel mode, disable the administration (banner and error) pages. The AppleTalk Gateway is not being restored in the UI after a Configuration Restore. You will need to reconfigure this gateway. After clearing a faulted job, the fault message is not erased. A streaming job caused a fatal system error. If possible, resubmit the job to a spooling queue. When deselecting Booklet as the output layout model, Sides Imaged remains 2-sided. Be sure to check the sides imaged setting after deselecting Booklet as the layout model. System Configuration Restore does not properly restore certain network configuration files, causing DocuSP to not boot. TBD: Does going into DocuSP Network Configuration and setting the DNS configuration fix the problem? TBD A job may print with the incorrect font on a page or the text may overwrite itself. Set the True Type Spot Size to 1.4. Controls for this setting can be found in Printer Manager: Image Quality: PostScript context. DocuColor 8000 DocuColor 2045/2060/6060/5252/8000 DocuColor 2045/2060/6060/5252/8000 All color printers All color printers All color printers DocuPrint CF DocuPrint 1xx EPS DocuTech 61xx DocuPrint 1xx EPS DocuTech 61xx DocuPrint 1xx EPS DocuTech 61xx DocuPrint 1xx EPS DocuTech 61xx DocuPrint 1xx EPS DocuTech 61xx DocuPrint 1xx EPS DocuTech 61xx 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

Caveat
Applicable printer product
External finishing cannot be selected at the
client using the IPP or HTTP gateways.
Submit the job to the printer without any
finishing, and select the external finisher at
the DocuSP.
DocuPrint 1xx EPS
DocuTech 61xx
Jobs with a Layout custom template and 1 Up
may complete with errors.
DocuColor 8000
In DocuSP 3.8, Offset was a system-level
setting and ON by default.
In DocuSP 4.x,
Offset is a queue setting and is OFF by
default.
Check the queue setting for Offset to
ensure it is set as needed.
DocuColor
2045/2060/6060/5252/8000
Using a streaming queue is not
recommended. Jobs hang with a status of
“Waiting for RIP.”
DocuColor
2045/2060/6060/5252/8000
Custom ICC profile files may not be restored
after a Configuration Restore.
All color printers
An FRF saved job displays incorrectly in the
viewer, but prints correctly.
All color printers
Jobs print in serial mode when the
administration pages and Page Parallel RIP
are enabled.
In order for jobs to print in
parallel mode, disable the administration
(banner and error) pages.
All color printers
DocuPrint CF
The AppleTalk Gateway is not being restored
in the UI after a Configuration Restore. You
will need to reconfigure this gateway.
DocuPrint 1xx EPS
DocuTech 61xx
After clearing a faulted job, the fault message
is not erased.
DocuPrint 1xx EPS
DocuTech 61xx
A streaming job caused a fatal system error. If
possible, resubmit the job to a spooling
queue.
DocuPrint 1xx EPS
DocuTech 61xx
When deselecting Booklet as the output
layout model, Sides Imaged remains 2-sided.
Be sure to check the sides imaged setting
after deselecting Booklet as the layout model.
DocuPrint 1xx EPS
DocuTech 61xx
System Configuration Restore does not
properly restore certain network configuration
files, causing DocuSP to not boot.
TBD: Does going into DocuSP Network
Configuration and setting the DNS
configuration fix the problem? TBD
DocuPrint 1xx EPS
DocuTech 61xx
A job may print with the incorrect font on a
page or the text
may overwrite itself.
Set the True Type Spot Size to 1.4. Controls
for this setting can be found in Printer
Manager: Image Quality: PostScript context.
DocuPrint 1xx EPS
DocuTech 61xx
20