Xerox 6200DX Troubleshooting Guide - Page 11

Problem Printing Is Too Light or Too Dark in All Colors Transparency Print Quality Possible Print Quality defects occurring on Transparency media such as: Light and/or Dark spots Smeared Toner Light Bands on print Solution 1. Try a different Color Matching mode. From the printer's front panel Support Menu select Improve Print Quality?, then select Print-Quality Tips Page. and press OK. Note: The TekColor Correction set to Automatic provides the best results for most documents. 2. If the print is too light, verify that the printer driver Print Quality Mode or Front Panel Defaults is not set to Draft Mode. 3. Adjust the light or darkness levels. From the front panel Support Menu select Improve Print Quality?, then select Calibrate Colors Menu, then selet Print Tutorial Page. Follow the procedure for Lighten/Darken Colors. Use only Phaser® 6200 Transparency. Using non-Phaser® 6200 Transparencies may cause printquality problems or damage the printer's Fuser. Damage caused by using non-supported media will not be covered under the warranty, service agreement or Total Satisfaction Guarantee. For a list of Transparency part numbers, refer to the printer's Paper Tips Page. See www.xerox.com/officeprinting/infoSMART on the world wide web for more on-line support information. Page 3 of 3