Yamaha 01X Owner's Manual - Page 28
X Channel Module, Input channels 1 through 8, Input channels 9 through 24 mL1 through mL16
View all Yamaha 01X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Before Using Basics Section Getting Started Overview of the 01X Input channel ● Input channels 1 through 8 These are monaural input channels used mainly for input of microphones or line-level instruments. The signals that are input to input channels 1 through 8 pass through an attenuator, phase switch, 4-band EQ, and dynamics processor, and are sent to the stereo bus, AUX buses 1 through 4 and Rec bus. Input channels 1 through 8 also have a direct output (DIRECT OUT), which allows them to be sent directly from mLAN outputs. ● Input channels 9 through 24 (mL1 through mL16) These are input channels for the signal from mLAN IN. Each of these channels is structured the same as the input channels. When the 01X is set to 88.2kHz (Macintosh only)/96kHz operation, mLAN input (from computer to the 01X) is limited to 8 channels (9-16: mL1-mL8). ● 01X Channel Module The included "01X Channel Module" is a special plug-in effect that reproduces the Dynamics and four-band EQ processing of these input channels using the processing power of your computer (refer to the separate Installation Guide). You can use the 01X Channel Module on your DAW independently from the 01X. For example when recording, you can apply Dynamics and EQ to the 01X's monitor sound only and record dry to the DAW, then play back the track, processing it with the 01X Channel Module as needed - all without the 01X. (Refer to the "DIRECT OUT POSITION" on page 91 and the 01X Channel Module PDF manual.) • Faders and most parameters of adjacent odd-even channels are linked for stereo operation (page 102). INPUT SELECT (INPUT PATCH) RECBUS (BUS) L RECBUS (BUS) R STEREO (STEREO BUS) L STEREO (STEREO BUS) R AUX 1 AUX 2 AUX 3 (FX1) AUX 4 (FX2) INPUT 1(...8) METER INSERT ATT 4BAND EQ DYNAMICS ON LEVEL PAN METER*3 (Gain Reduction) PRE/POST ON AUX Mono in X 8 DIRECT OUT1(...8) INPUT 9(...24*1) (mL1-mL16*2) METER mLAN IN 1-16*2 INSERT DY- ATT 4BAND EQ NAMICS ON LEVEL PAN METER*3 (Gain Reduction) PRE/POST ON AUX Mono in X 16 (96kHz/88.2kHz: X 8) DIRECT OUT9(...24*1) mLAN INPUT 16*2 IEEE 1394 2 mLAN IN mLAN STEREO IN (MONITOR IN) (to MONITOR CASCADE) *1 Wordclock 96kHz/88.2kHz : 16 *2 Wordclock 96kHz/88.2kHz : 8 *3 Studio Manager only Reference Appendix 28 01X Owner's Manual