Yamaha 02R96 Studio Manager Installation Guide - Page 11

8 Chapter 2-Windows Installation Windows Me 1 Start your computer and Windows, and insert the included CD-ROM into your computer's CD-ROM drive. 2 Turn off the DM2000/02R96 and use a USB cable to connect the USB TO HOST port on the DM2000/02R96 to a USB port on your computer. 3 Turn on the DM2000/02R96. The Add New Hardware Wizard appears. If it doesn't appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 4 Select "Automatic search for a better driver (Recommended)," and then click Next. Windows Me should be able to locate the driver automatically, in which case you can proceed to Step 5. If the driver cannot be located, select "Specify the location of the driver (Advanced)," click Next, specify your CD-ROM drive (e.g., D:\USBdrv_), and then continue as prompted. The following window appears when the installation is complete. 5 Click Finish, and then restart your computer. Studio Manager for DM2000/02R96-Installation Guide