Yamaha 140 Owner's Manual - Page 21
Adding Variations to the Sound - Reverb
UPC - 027108937908
View all Yamaha 140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Selecting & Playing Voices Adding Variations to the Sound - Reverb This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create a realistic acoustic ambience. Procedure While holding down the [PIANO/VOICE] button, press one of the C2-E2 keys to select a reverb type. C2 D2 The lowest key C2 D2 E2 Key C2 C2 D2 D2 E2 Reverb Type Room Hall1 Hall2 Stage Off Description This setting adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room. For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall. For a truly spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall. Simulates the reverb of a stage environment. No effect is applied. Adjusting Reverb Depth Adjust the reverb depth for the selected voice by pressing one of the C3-G 4 keys while holding down the [PIANO/VOICE] button. The depth range is from 0 through 20. G 4: depth 20 The lowest key C3: depth 0 A4 The depth value increases as you press higher keys. While holding down the [PIANO/VOICE] button, press the A4 key to set the reverb to the depth most suitable for the selected voice. The default reverb type (including OFF) and depth settings are different for each voice. depth 0: no effect depth 20: maximum reverb depth 19 YDP-160/140 Owner's Manual 21