Yamaha 24N DME64N/24N V3 Owners Manual - Page 30
MIDI Connection ([MIDI] Connectors), DME64N/24N from a MIDI device.
View all Yamaha 24N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
MIDI Connection ([MIDI] Connectors) MIDI Connection ([MIDI] Connectors) In this case connection is made to the rear-panel [MIDI] connectors. MIDI commands are sent to the DME64N/24N from a MIDI device. NOTE Refer to "MIDI Page" on page 51 for MIDI setup details. NOTE The DME Designer can be used to set up the system so that scene recall operations and user parameter control can be carried out from connected MIDI devices. Refer to the DME Designer manual for details. By connecting the [MIDI OUT] terminal of a digital mixer (such as the DM2000) to the [MIDI OUT] of the DME64N/24N and making the proper settings on the mixer and the DME64N/24N, you can change scenes by sending program change messages from the mixer. MIDI Cable MIDI OUT MIDI IN DME64N/24N DM2000 Digital Mixer or Other Controller If the [MIDI OUT] connector of the DME64N/24N is connected to the [MIDI IN] connector of an SPX2000 or similar digital effect unit, and if the DME64N/24N and SPX2000 are set up appropriately, DME64N/24N program change operations will case the corresponding effect to be recalled on the effect unit. MIDI Cable MIDI OUT MIDI IN DME64N/24N SPX2000 or Other Digital Effect Unit Connecting to an External Device 30 DME64N/DME24N Owner's Manual