Yamaha 24N DME64N/24N V3 Owners Manual - Page 39
Mute Switching, Output Level Control, Scene Recall, Press the [LEVEL] key.
View all Yamaha 24N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Mute Switching Turns the DME64N/24N output mute function ON or OFF. 1. Press the [MUTE] key. The Mute Parameter Edit display will appear. Parameter Edit Displays Scene Recall This procedure recalls a new scene (refer to page 10). NOTE The same procedure is used for scene recall from an ICP1 control panel. 1. Press the [SCENE] key. The Scene Recall display will appear. 2. Select Mute ON or OFF. The mute function is turned on or off as described in "ON/OFF Parameters" on page 38. NOTE To access this function from the ICP1 control panel, hold the [F6] key for longer than 2 seconds. NOTE All outputs in the device group, including the [PHONES] jack, are muted. Output Level Control Adjust the output level of the DME64N/24N. NOTE Output level settings apply individually to each DME64N/24N unit. There is no overall device group setting. This function cannot be accessed from the ICP1 control panel. 1. Press the [LEVEL] key. The "Output Level" Parameter Edit display will appear. 2. Select a new scene. Scenes are selected as described in the "List Parameters" section on page 38. 3. Press the [ENTER] key. A confirmation window will appear. 4. Press the [ENTER] key again. The new scene will be selected. Panel Operation and Displays 2. Adjust the numeric output level parameter as required. The Output Level parameter is adjusted as described in "Numeric Parameters" on page 36. The graphic fader provides a visual indication of the current output level setting. Don't turn the power off during a scene recall operation. Doing so can cause corruption of the CAUTION current scene data. DME64N/DME24N Owner's Manual 39