Yamaha 505 Reference Manual - Page 13
Effect/eq Reverb Depth/chorus Depth/dsp Depth/vib Rotor, Harmony Dsp On/off
View all Yamaha 505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
■ EFFECT/EQ Page 1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/VIB ROTOR [1 ▲▼]/ [2 ▲▼] REVERB DEPTH Adjusts the reverb depth. [3 ▲▼]/ [4 ▲▼] CHORUS DEPTH Adjusts the chorus depth. [5 ▲▼] DSP ON/OFF Determines whether the DSP is on or off. [6 ▲▼] DSP DEPTH Adjusts the DSP depth. If you want to re-select the DSP type, you can do so in the "2 DSP" menu explained below. [7 ▲▼] VIBE ROTOR This will be displayed only if VIBE VIBRATE is selected for the DSP Type parameter explained below. Determines whether VIBE VIBRATE should be set to on or off when selecting the Voice. 2 2 DSP [1 ▲▼]- [4 ▲▼] DSP TYPE Selects the DSP effect category and type. Select a type after selecting a category. Voices - Playing the Keyboard - [5 ▲▼]- [8 ▲▼] VARIATION Two variations are provided for each DSP type. Here, you can edit the VARIATION on/off status and variation's parameter value setting. [5 ▲▼] ON/OFF The factory-programmed assignments are set to variation-off for all Voices (standard variation of DSP is assigned). If you select VARIATION ON here, a variation of the DSP effect is assigned to the Voice. The variation parameter value can be adjusted in the VALUE menu explained below. PARAMETER Displays the variation parameter. (This differs depending on the effect type and cannot be changed.) [6 ▲▼] VALUE -[8 ▲▼] Adjusts the value of the DSP variation parameter. 3 EQ Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to page 74. ■ HARMONY Page Harmony sets the Right 1 and 2 parts together. Select the Right 1 part in the Main display, before you set it. This has the same settings as the display of "Selecting the Harmony/Echo type" page 5 in step 3. CVP-509/505/503/501 Reference Manual 13