Yamaha 505 Reference Manual - Page 82
Talk Settings, Call up the operation display., using the [1, buttons.
View all Yamaha 505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Talk Settings This function gives you special settings for making announcements between songs, separate from the settings for your singing performance. 1 Call up the operation display. [FUNCTION] → [G] MIC SETTING/VOCAL HARMONY → [I] MIC SETTING → TAB [E][F] TALK SETTING 2 Use the [A]/[B] buttons to select the parameter to be adjusted, then set the value by using the [1 ▲▼]-[7 ▲▼] buttons. Connections - Using Your Instrument with Other Devices - 10 CAUTION Settings in the TALK SETTING Page are automatically saved to the instrument when you exit from the display. However, if you turn the power off without exiting from this display, the settings will be lost. NOTE The settings here can be saved to USER or USB as a System Setup file: [FUNCTION] → [J] UTILITY → TAB [E][F] SYSTEM RESET. See page 101. 1 Talk Setting Parameters [1 ▲▼] VOLUME This determines the output volume of the microphone sound. [2 ▲▼] PAN This sets the stereo pan position of the microphone sound. [4 ▲▼] REVERB DEPTH [5 ▲▼] CHORUS DEPTH [6 ▲▼]/ TOTAL [7 ▲▼] VOLUME ATTENUATOR These set the depth of the reverb effects applied to the microphone sound. This sets the depth of the chorus effects applied to the microphone sound. This determines the amount of attenuation to be applied to the overall sound (excepting the microphone input)-allowing you to effectively adjust the balance between your voice and the overall instrument sound. 2 DSP Parameters [3 ▲▼] DSP MIC ON/ OFF This turns the DSP effect applied to the microphone sound ON or OFF. [4 ▲▼]/ DSP MIC TYPE This selects the type of DSP effect to be applied to the microphone sound. [5 ▲▼] [6 ▲▼] DSP MIC DEPTH This sets the depth of the DSP effect applied to the microphone sound. 82 CVP-509/505/503/501 Reference Manual