Yamaha AX-870 Owner's Manual - Page 10

Adjusting the BASS and TREBLE, controls, Adjusting the BALANCE control, Selecting the SPEAKER system

Page 10 highlights

Adjusting the BALANCE control Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions. BALANCE l 0l 2 2 3 3 4 L5 4 5R Selecting the SPEAKER system Because one or two speaker systems can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once. SPEAKERS Adjusting the BASS and TREBLE controls BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response. TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response. BASS l DEFEAT l 2 2 3 3 4 5 4 5 TREBLE l DEFEAT l 2 2 3 3 4 5 4 5 Adjusting the continuously variable LOUDNESS control This control provides compensation for the human ears' loss of sensitivity to high and low-frequency ranges at low volume. This control is adjustable to retain full tonal range at any volume level. 1 LOUDNESS 0 9 8 67 Set to the "FLAT" position. 2 TURNOVER FREQUENCY switch These switches can be used to adjust the turnover point of the tone controls: either 200 Hz or 400 Hz for BASS and either 2.5 kHz or 5 kHz for TREBLE. This gives you flexible control over bass and treble response characteristics. Set to the loudest listening level that you would listen to. TURNOVER FREQUENCY 400Hz 2.5kHz 200Hz 5kHz 3 LOUDNESS 0 9 8 67 Turn so that the desired volume can be achieved. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

10
Adjusting the BASS and TREBLE
controls
Adjusting the BALANCE control
Selecting the SPEAKER system
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused from
speaker location or listening room conditions.
Because one or two speaker systems can be connected to this
unit, the
SPEAKERS
switches allow you to select speaker
system
A
or
B
, or both at once.
BASS
:
Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE
:
Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
TURNOVER FREQUENCY switch
<
For AX-1070 only
>
These switches can be used to adjust the turnover point of the
tone controls: either 200 Hz or 400 Hz for
BASS
and either 2.5
kHz or 5 kHz for
TREBLE
. This gives you flexible control over
bass and treble response characteristics.
Adjusting the continuously variable
LOUDNESS
control
This control provides compensation for the human ears’ loss of
sensitivity to high and low-frequency ranges at low volume.
This control is adjustable to retain full tonal range at any
volume level.
1
Set to the “FLAT” position.
2
Set to the loudest listening level that
you would listen to.
3
Turn so that the desired volume can
be achieved.
BALANCE
5
5
4
3
2
l
0
l
2
3
4
L
R
SPEAKERS
BASS
5
5
4
3
2
l
l
2
3
4
DEFEAT
TREBLE
5
5
4
3
2
l
l
2
3
4
DEFEAT
6
7
8
9
0
LOUDNESS
6
7
8
9
0
LOUDNESS
TURNOVER FREQUENCY
400Hz
200Hz
2.5kHz
5kHz