Yamaha AX-870 Owner's Manual - Page 11
Using the PURE DIRECT switch, Setting the SUBSONIC FILTER switch, Setting the PHONO switch
View all Yamaha AX-870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English Using the PURE DIRECT switch You can enjoy the purest possible sound from your audio sources by setting this switch so that the indicator illuminates. By doing so, the audio signal bypasses the BASS, TREBLE, BALANCE and LOUDNESS controls, the SUBSONIC FILTER switch and the PRE OUT/MAIN IN terminals, eliminating any alterations to the audio signal. PURE DIRECT Setting the PHONO switch Select either MM or MC position depending on your PHONO cartridge, Moving Magnet or Moving Coil type. However, if you use a high output MC cartridge, select MM position. PHONO MC MM Setting the SUBSONIC FILTER switch If you set this switch to "ON" position, undesirable ultra-lowfrequency signals caused by turntable rumble or warped records can be cut out without losing sound quality. SUBSONIC FILTER ON OFF Setting the MODE switch This switch can be used for switching between stereo and monaural operation. Normally this switch should be set to the STEREO position. MODE MONO STEREO When you listen with headphones Connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position. PHONES 11