Yamaha BD-A1040 Owners Manual - Page 20
Other connections, Connecting to the REMOTE CONTROL jacks, Connecting the power cable
View all Yamaha BD-A1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Other connections ■ Connecting to the REMOTE CONTROL jacks - You can transmit and receive the remote control signals by connecting to the REMOTE CONTROL (OUT/IN) jacks. - Firmly connect monaural 3.5 mm mini plug cables (commercially available) to the REMOTE CONTROL (OUT/IN) jacks. Caution! Do not connect the power cable of this Player until all connections are completed. This Player AUDIO OUT OUT IN RS-232C REMOTE CONTROL Hints - If your AV receiver is a Yamaha product and has the capability to transmit SCENE control signals from the REMOTE OUT jack, you can control the Player with the SCENE function. For details about the SCENE function, refer to the owner's manual supplied with your Yamaha AV receiver. - You can connect a Yamaha component (such as CD player) supports the SCENE function to the REMOTE CONTROL (OUT) jack of this Player. - The RS-232C terminal is a control expansion terminal for commercial use. Consult your dealer for details. ■ Connecting the power cable - After all connections are completed, plug the supplied power cable into the AC IN on the rear of the Player. Then plug into AC outlet. 32C AC IN To REMOTE CONTROL (OUT) jack To REMOTE CONTROL (IN) jack Monaural 3.5 mm mini plug cable Monaural 3.5 mm mini plug cable To remote control in jack To remote control out jack REMOTE CONTROL IN REMOTE CONTROL OUT To AC outlet Yamaha component Infrared signal receiver or Yamaha component (such as AV receiver) 18 En