Yamaha CDX-590 Owner's Manual - Page 9

English To stop play temporarily PAUSE To stop play completely STOP To resume play, press the PAUSE button again (or press the PLAY button). * The PLAY/PAUSE button on the front panel can also be used to stop play temporarily or to resume play. To play a desired track on the disc DIRECT PLAY Select a desired track using the numeric button. 5 SKIP PLAY To play from the beginning of the track following the one now playing SKIP 12345678 9 The selected track number is displayed Example: To select track 25 Press Œ twice, then immediately press  once. +I0 5 Œ  * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. Caution When the disc tray is open, do not touch the inside gear wheel. If you touch the gear wheel, your finger may be caught in the closing tray and injured. To play from the beginning of the track now playing SKIP To play from the beginning of the track before the one now playing SKIP (twice) • These operations can also be performed when the unit is in the pause or stop mode. • CDX-890 only If the button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). • CDX-590 and CDX-490 only When using the SKIP button on the remote control transmitter: If the button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). When using the SKIP/SEARCH button on the front panel: Be careful not to press and hold the button, otherwise the selected track is played forward (or backward) rapidly. Gear wheel 9