Yamaha CDX-593MKII Owner's Manual
Yamaha CDX-593MKII Manual
 |
View all Yamaha CDX-593MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha CDX-593MKII manual content summary:
- Yamaha CDX-593MKII | Owner's Manual - Page 1
YAMAHA Tape Deck • Adjustable Display Brightness • Remote Control Capability • CDX-593 Optical and Coaxial Digital Outputs • CDX-493 and 393MKII Optical Digital Output CONTENTS Safety Instructions Notes about Handling Compact Discs 20 Troubleshooting 21 Specifications 22 MODE D'EMPLOI - Yamaha CDX-593MKII | Owner's Manual - Page 2
you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE often undetectable until it is too late, YAMAHA and the Electronic Industries Association's Consumer Manual in a safe place for future reference. - Yamaha CDX-593MKII | Owner's Manual - Page 3
to read the "TROUBLESHOOTING" section on common operating servicing to qualified personnel only. To avoid electrical shock, do not open the unit. Refer servicing instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha eliminate the problem by using - Yamaha CDX-593MKII | Owner's Manual - Page 4
to the unit and the amplifier or other components. • Connections should be made to the correct input terminals of the amplifier or other components. CDX-593 • If the placement of this unit creates interference (noise) in other equipment, such as a tuner, relocate this unit away from the affected - Yamaha CDX-593MKII | Owner's Manual - Page 5
instructions for the amplifier being used. • The LINE OUT terminals of this unit are numbered 1. When connecting this unit with a YAMAHA onto a tape directly. CDX-593 and CDX-493 • The signal output level to an amplifier can be adjusted by using the OUTPUT LEVEL button. 3 CDX-593 When the DIGITAL - Yamaha CDX-593MKII | Owner's Manual - Page 6
on the remote control transmitter. CDX-593, CDX-493 POWER switch (p. 8) AUTO DISPLAY OFF indicator CDX-593 only (p. 11) SKIP/ 6 7 8 9 0 OUTPUT LEVEL Disc Tray (p. 8) Remote control sensor (p. 20) CDX-393MKII POWER switch (p. 8) Display panel PHONES jack (p. 11) POWER OPEN/CLOSE +10 - Yamaha CDX-593MKII | Owner's Manual - Page 7
. Any difference in the operation of other models is clearly indicated in this instruction (for example, "CDX-593 only"). This manual describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use the corresponding buttons on - Yamaha CDX-593MKII | Owner's Manual - Page 8
9 10 11 12 SINGLE 1 Shows the track number selected or being played. 2 Shows the time displays. (Refer to "Selecting time displays" on page 10.) 3 CDX-593 and CDX-493 Shows the signal output level to an amplifier or the headphones, adjusted by using the OUTPUT LEVEL button. 4 Displays the CD track - Yamaha CDX-593MKII | Owner's Manual - Page 9
English To stop play temporarily PAUSE To stop play completely STOP To resume play, press the PAUSE button again (or press the PLAY button). * button on the front panel can also be used to stop play temporarily or to resume play. To play a desired track on the disc DIRECT PLAY Select a - Yamaha CDX-593MKII | Owner's Manual - Page 10
search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. • Manual search can also be performed while disc play is paused, though no sound will be heard. • When using the SKIP/SEARCH button on the front - Yamaha CDX-593MKII | Owner's Manual - Page 11
DISPLAY OFF Dim (The AUTO DISPLAY OFF indicator lights up. In this state, if a disc is played, the display illumination will be turned off.) CDX-493, CDX-393MKII If desired, you can change the brightness of the display in three degrees by pressing the DIMMER button. When you listen with headphones - Yamaha CDX-593MKII | Owner's Manual - Page 12
mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order. * CDX-593 and CDX-493 only If the power is switched off during FULL REPEAT play mode, pressing the POWER switch again to turn the unit on will - Yamaha CDX-593MKII | Owner's Manual - Page 13
English PROGRAM PLAY By programming tracks, you can enjoy listening to your favorite tracks in any desired order. As many as 25 tracks can be programmed in sequence. 3 1 SYNCHRO DIMMER TIME OPEN/ CLOSE SPACE PEAK TAPE CLEAR PROG 1 2 3 INDEX 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH - Yamaha CDX-593MKII | Owner's Manual - Page 14
To stop program play Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. To check program data 1. Press the STOP button to stop the program play. 2. Press the PROG button. 3. Press - Yamaha CDX-593MKII | Owner's Manual - Page 15
PLAY 4 7 6, 7 4 Otherwise, you can enter the tape's total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 6 4 + 5 Press side B. • You can use "CD SYNCHRONIZED RECORDING" if you have a YAMAHA tape deck with this function. In step 6 and 7, press the SYNCHRO - Yamaha CDX-593MKII | Owner's Manual - Page 16
L Manual tape-programming For recording tracks in any desired order onto a tape. 4 7 SYNCHRO DIMMER TIME OPEN/ indicate the next program number. • You can use "CD SYNCHRONIZED RECORDING" if you have a YAMAHA tape deck with this function. In step 6 and 7, press the SYNCHRO button then press the - Yamaha CDX-593MKII | Owner's Manual - Page 17
English L Automatic Random Program tape recording The unit can automatically program tracks in random order for recording to tape. 4 SYNCHRO DIMMER TIME OPEN/ CLOSE SPACE PEAK TAPE CLEAR PROG 1 2 3 INDEX 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH - OUTPUT LEVEL + SKIP STOP PAUSE - Yamaha CDX-593MKII | Owner's Manual - Page 18
Automatic searching for the peak level on a disc This convenient feature automatically finds level peak in the source. It then plays the peak repeatedly for a few moments in order for you to adjust the recording level on the tape deck, before you begin recording. 2 1 SYNCHRO DIMMER TIME OPEN/ - Yamaha CDX-593MKII | Owner's Manual - Page 19
With this function, you can record a CD on tape very easily and more precisely. This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed near each - Yamaha CDX-593MKII | Owner's Manual - Page 20
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range CDX-593 2 1 Remote control sensor 3 Within approximately 6 m (19.7 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main - Yamaha CDX-593MKII | Owner's Manual - Page 21
TROUBLESHOOTING column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM The player does not switch ON replace it if necessary. Connect the cables properly. If the problem persists, the cables may be defective. Set the amplifier controls - Yamaha CDX-593MKII | Owner's Manual - Page 22
2 Hz - 20 kHz, ±0.5 dB Harmonic distortion + noise (1 kHz) - Yamaha CDX-593MKII | Owner's Manual - Page 23
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
 |
 |
CARACTERISTIQUES
•
Lecture programmable à accès aléatoire
•
Lecture en séquence aléatoire
•
Lecture répétée de plage unique/disque entier
•
Fonction d’espacement automatique
•
Programmation automatique de pour
l’enregistrement sur bande
•
Fonction de recherche automatique du niveau
de crête
•
Enregistrement synchronisé de CD avec un
magnétophone à cassette compatible
YAMAHA
•
Fonction de modification de luminosité de
l’affichage
•
Fonctionnement par télécommande
•
CDX-593
Sorties numérique optique et sortie
numérique coaxiale
•
CDX-493 et 393MKII
Sortie numérique optique
CDX-593/493/393MK
II
Compact Disc Player
Lecteur Compact Disque
Thank you for selecting this YAMAHA Compact Disc Player.
Nous vous remercions d’avoir porté votre choix sur ce lecteur
de disque audionumérique YAMAHA.
OWNER’S MANUAL
FEATURES
•
Random Access Programmable Play
•
Random-Sequence Play
•
Single Track/Entire Disc Repeat Play
•
Automatic Spacing Capability
•
Automatic Programming for Recording to
Tape
•
Automatic Peak Level Searching Capability
•
CD Synchronized Recording with a
Compatible YAMAHA Tape Deck
•
Adjustable Display Brightness
•
Remote Control Capability
•
CDX-593
Optical and Coaxial Digital Outputs
•
CDX-493
and 393MKII
Optical Digital Output
MODE D’EMPLOI
CONTENTS
Safety Instructions
................................................
2
Connections
.........................................................
4
Identification of Components
................................
6
Basic Operation
....................................................
8
Random-Sequence Play
....................................
12
Repeat Play
........................................................
12
Program Play
......................................................
13
Index Search
......................................................
14
Track Programming for Recording to Tape
.........
15
CD Synchronized Recording
..............................
19
Notes about the Remote Control
Transmitter
.........................................................
20
Notes about Handling Compact Discs
...............
20
Troubleshooting
..................................................
21
Specifications
.....................................................
22
TABLE DES MATIERES
Attention
...............................................................
3
Connexions
..........................................................
4
Identification des composants
..............................
6
Fonctionnement de base
......................................
8
Lecture en séquence aléatoire
...........................
12
Lecture répétée
..................................................
12
Lecture programmée
..........................................
13
Recherche d’index
.............................................
14
Programmation des plages pour
enregistrement sur bande
..................................
15
Enregistrement synchronisé d’un CD
.................
19
Remarques concernant la télécommande
.........
20
Remarques concernant la manipulation des disques
compacts
......................................................................
20
Dépistage de pannes
.........................................
21
Caractéristiques techniques
...............................
22
U C A