Yamaha CDX-593MKII Owner's Manual - Page 8
Basic Operation
View all Yamaha CDX-593MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
BASIC OPERATION 1 POWER 1 Turn the power on. POWER SYNCHRO DIMMER TIME OPEN/ CLOSE SPACE PEAK TAPE CLEAR PROG 1 2 3 INDEX 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH - OUTPUT LEVEL + SKIP STOP PAUSE PLAY 2, 3 4 3 Close the disc tray. OPEN/ CLOSE 2 Load a disc. Label side up 4 OPEN/ CLOSE PLAY Disc tray Display information during disc play 3 4 5 6 7 8 9 10 11 12 SINGLE 1 Shows the track number selected or being played. 2 Shows the time displays. (Refer to "Selecting time displays" on page 10.) 3 CDX-593 and CDX-493 Shows the signal output level to an amplifier or the headphones, adjusted by using the OUTPUT LEVEL button. 4 Displays the CD track numbers (up to 20). After each track is played, its corresponding number disappears so that remaining track numbers can be seen at a glance. To turn off the power Press the POWER switch again. * If you turn on the power again with a CD in the tray, you can start playing the CD automatically. 8 Play will begin from the first track of the disc. Notes • After closing the disc tray by pressing the OPEN/CLOSE button, the display shows the total number of tracks and the total recorded time of the disc for a few seconds. TOTAL 1 2 3 4 5 6 7 8 9 10 11 12 • You can also close the disc tray by pressing the PLAY button (or button on the front panel), a number button, the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in any of these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the disc.