Yamaha CLP-411 Owner's Manual - Page 48

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato If you're already very familiar with MIDI, or are using a computer to control your music hardware with computergenerated MIDI messages, the data provided in this section can help you to control the Clavinova. Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Erzeugung von MIDI-Steuermeldungen für die Instrumente verwenden, können Sie sich zur Steuerung des Clavinovas nach den im folgenden Abschnitt aufgeführten Spezifikationen richten. 1. NOTE ON/OFF Data format: [9nH] -> [kk] -> [vv] 9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8) vv = Velocity (Key ON = 1 ~ 127. Key OFF = 0) Data format: [8nH] -> [kk] -> [vv] 8nH = Note OFF event (n = channel number) kk = Note number: 00H ~ 7FH = C-2 ~ G8 vv = Velocity (Key OFF = 0 ~ 127) * 8nH (note off) is receive only. 9nH (vvH=00H) used for transmission. 2. CONTROL CHANGE & MODE MESSAGES Data format: [BnH] -> [cc] -> [vv] BnH = Control event (n = channel number) cc = Control number vv = Data Range 2.1 Control Change 2.1.(1) Bank Select Cntrl# 0 32 Parameter Bank Select MSB Bank Select LSB Data Range 0:Normal 0...127 112 Variation Off 113 Variation On A new bank selection does not become effective until receipt of the next Program Change message. 2.1.(2) Main Volume (reception only) Cntrl# Parameter 7 Volume MSB Data Range 0...127 2.1.(3) Expression Cntrl# Parameter 11 Expression MSB Data Range 0...127 2.1.(4) Damper Cntrl# Parameter 64 Damper MSB Data Range 0...127 Half pedal continuous data is received and accepted. 2.1.(5) Sostenuto Cntrl# Parameter 66 Sostenuto Data Range 0...127 (0-63:off, 64-127:on) 2.1.(6) Soft Pedal Cntrl# Parameter 67 Soft Pedal Data Range 0...127 (0-63:off, 64-127:on) 2.1.(7) Attack Time Cntrl# Parameter 73 Attack Time Data Range 0...127 2.1.(8) Effect1 Depth ( Reverb Send Level ) Cntrl# Parameter 91 Effect1 Depth Data Range 0...127 Adjusts the reverb send level. 44 Si vous êtes très familier avec l'interface MIDI ou si vous utilisez un ordinateur pour commander votre matériel de musique au moyen de messages MIDI générés par ordinateur, les données suivantes vous seront utiles et vous aideront à commander le Clavinova. SI usted está ya familiarizado con MIDI, o si emplea una computadora para controlar sus aparatos musicales con mensajes MIDI generados por computadora, los datos proporcionados en esta sección le ayudarán a controlar la Clavinova. 2.1.(9) Effect4 Depth ( Variation Effect Send Level ) Cntrl# Parameter 94 Effect4 Depth Data Range 0...127 2.2 Mode Messages The following Channel Mode messages are supported. (But the actual mode is fixed to Poly and can not be changed.) Cntrl# 120 121 123 124 125 126 127 Parameter All Sound Off Reset All Controllers All Notes Off Omni Off Omni On Mono Poly Data Range 0 0 0 0 0 0 ~ 16 0 2.2.(1) All Sound Off Switches off all sound from the channel. Does not reset Note On and Hold On conditions established by Channel Messages. 2.2.(2) Reset All Controllers Resets controllers as follows. Controller Expression Damper Pedal Sostenuto Soft Pedal Value 127 (max) 0 (off) 0 (off) 0 (off) 2.2.(3) All Notes Off Switches off all of the channel's "on" notes. Any notes being held by DAMPER or SOSTENUTO continue to sound until DAMPER/ SOSTENUTO goes off. 2.2.(4) Omni Off (reception only) Same processing as for All Notes Off. 2.2.(5) Omni On (reception only) Same processing as for All Notes Off. 2.2.(6) Mono (reception only) Same processing as for All Sound Off. 2.2.(7) Poly (reception only) Same processing as for All Sound Off. * When control change reception is turned OFF in the Function mode, no control change data is transmitted or received. * Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with "All Note Off" transmission). * When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. * The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received.