Yamaha CVP-805 CVP-809/CVP-805 Reference Manual - Page 50
Effect, EQ, Keyboard Harmony, Pedal, Modulation, Amplitude, LFO Pitch, LFO Filter, Insertion, On/Off
View all Yamaha CVP-805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Editing a Voice (Voice Edit) Modulation (+)/(-) Amplitude LFO Pitch LFO Filter LFO Amplitude Determines the degree to which the pedal modulates the amplitude (volume). Determines the degree to which the pedal modulates the pitch, or the vibrato effect. Determines the degree to which the pedal modulates the Filter cutoff frequency, or the wah effect. Determines the degree to which the pedal modulates the amplitude, or the tremolo effect. Effect Insertion Effect Reverb* Chorus* On/Off Turns the Insertion Effects on or off. Type Selects the Insertion Effect Type. Select the Category then select the Type. You can adjust the detailed parameters by touching (Setting) and save them. Refer to "Editing and Saving the Effect settings" (page 13) for details. Depth Adjusts the Insertion Effect Depth. Vibe Rotor Available only if "VibeRotor" in the "Legacy" category is selected as the Insertion Effect Type explained above. Determines whether Vibe Rotor should be set to on or off when selecting the Voice. Depth Adjusts the Reverb Depth. Depth Adjusts the Chorus Depth. *Reverb and Chorus depth cannot be edited when a VRM Voice is selected, but can be edited via [Menu] → [VoiceSetting] → [Piano] (page 1/2). For details, refer to page 79. EQ Determines the Frequency and Gain of the EQ bands. For information about EQ, refer to page 11. Keyboard Harmony From this display, you can set the same parameters as those in the Keyboard Harmony display (step 2 on page 24). Before making any settings, make sure that the current part is set to Main; in other words, you should select the Main part by touching the Voice name at the top of the Voice Edit display, or by pressing the VOICE [MAIN/LAYER/LEFT] button. The settings here are called up automatically simply by selecting the corresponding Voice. Pedal This section allows you to select the function to be assigned to the center or left pedal. Before making any settings, make sure that the current part is set to Main; in other words, you should select the Main part by touching the Voice name at the top of the Voice Edit display, or by pressing the VOICE [MAIN/LAYER/LEFT] button. The settings here are called up automatically simply by selecting the corresponding Voice. For details about the pedal function, refer to page 44. CVP-809/CVP-805 Reference Manual 50