Yamaha CVP105 Reference Booklet - Page 46
CVP-105: Assembly
View all Yamaha CVP105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
1 • AC power cord • Phone jacks • Cardboard packing cushions • 5 x 12 mm screws x 30 CVP-105: Assembly CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Be sure to use the correct screw size, as indicated above. Use of incorrect screws can cause damage. • Be sure to tighten up all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence given below. ZOpen the box and remove all the parts. Take out the two cardboard packing cushions and place them on the floor. Then take out main unit and place it on top of the packing cushions. Position the cushions so as to protect the phone jacks on the base of the unit. Remove all parts from the box. Confirm that all parts shown in the illustration above are provided. CAUTION • When you lift the pedal box assembly, make sure that you lift by both legs. 46 CVP-109/107/105/103/700