Yamaha CVP105 Reference Booklet - Page 48
Attach the speaker box., Attach the pedal box assembly.
View all Yamaha CVP105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4 5 • Four screws on each side • Cord holder VAttach the speaker box. Gently rest the speaker box onto the corresponding brackets on the front legs. Make sure the speaker cord is extending out from the rear of the speaker box. Loosely secure the speaker box to the main keyboard unit using four screws on both the front and back. (The speaker will be secured in step B.) Insert the speaker cord connector into the corresponding socket on the main keyboard unit, making sure that the protruding clip on the connector is facing up. BAttach the pedal box assembly. First, remove the vinyl tie from the left leg. Make sure you don't remove the cord holder on the top of the left leg. Using 6 screws for each leg (four screws per leg and two screws on each leg bracket) loosely secure the rear leg and pedal box assembly making sure that the pedal cord on the left leg protrudes from the cut hole on the underside of the main unit. Once loosely attached, go back and firmly tighten all 12 screws on the rear leg and pedal assembly, and also secure the 8 screws on the speaker box. After the rear leg and pedal assembly is securely attached, insert the pedal cord plug into the PEDAL connector on the rear panel. • Vinyl tie 48 CVP-109/107/105/103/700